Page 31 - Prestige Pulpdent

CLINICAL INDICATIONS
- Post and core build-up after endo - Direct bonded core without a post - Vital tooth build-up for crown prep - Re-cementing loose post and core - Base/liner under restorations
PHYSICAL PROPERTIES
Compressive strength:
Flexural strength:
Self-cure intra-oral setting time at 37 ° C: Light cure setting time:
Depth of cure:
40,625 psi / 280 MPa 14,065 psi / 97 MPa 3:10 minutes 20 seconds 4 mm
SBU50
Automix cartridge of 50mL (83 gm) + 30 Automix tips
SBU
Automix cartridge of 25mL (41.5 gm) + 20 Automix tips
FD20
20 Automix tips
F20N2
20 Automix tips, with bendable 19 gauge cannula
DS24
Dispenser for 25mL, 1:1 Automix cartridge
DS50
Dispenser for 50mL, 1:1 Automix cartridge
CORE FORMS
Transparent, clear polyethylene for light cure. Will not stick to core material. Tab on top and tapered sides for easy pick up and retrieval, and reference ring for accurate trimming.
HCF-AS
Box of 64 assorted core forms, 16 each size: S, M, L, XL
HCF*
Box of 64 core forms, all one size: S, M, L or XL
* Specify size: Small (1), Medium (2), Large (3), XLarge (4)
1
After endodontic treatment, a molar is prepared with two post holes.
2
Pulpdent Etch-Rite is applied to the post holes and the preparation for 15 seconds (optional step).
3
After rinsing thoroughly, removing excess moisture and leaving the tooth slightly moist, Spee- Dee Build-Up is dispensed into the post holes and around the preparation.
4
The posts are inserted with a twisting, up and down motion to ensure uniform coverage of Spee-Dee Build-Up, and then light cured for 20 seconds.
5
Spee-Dee Build-Up is now applied around the posts to the occlusal level.
6
The post and core preparation is trimmed and finished and ready for an impression or digital scan.